The tune layouts here assume melodeon is DG, but should work just as well for non-DG diatonic melodeons. For non-DG, apply transposition to find how the low notes shown on the tune index listing relate to the low notes on your melodeon. == Allocation of low notes or "draw D note" to buttons is shown in "INSTRUCTION Basics (for Easy tunes)". If your layout differs from mine you may need to modify the tune sheet. Here's a recap: g-1 << first G-row button on “3rd button start”, mine is B/D. Draw D is signalled on the tune layouts by button g-1 draw. g-2 << first G-row button on “4th button start”, mine is G/C d-1 << first D-row button on “3rd button start”, mine is F#/B d-2 << first D-row button on “4th button start”, mine is D/G == Whether yours is 3rd or 4th button start, the button numbers shown in the tune sheets are unaffected except that in the case of a 3rd button start you will not have buttons g-2 and d-2. Fingering shown in the tune sheets is unaffected by button start. == The tune layouts here assume "thirds IN". That means they assume you are sounding 1st, 3rd and 5th notes in chords. Therefore, when a bass button is not available for a given chord and it has to be built manually from treble notes, three treble notes are specified in these tune layouts. Sometimes however melodeons are configured to play without thirds in the bass chords, meaning a chord consists of 1st and 5th notes only ("thirds out"). If this is the case for you, where you see three treble notes specified in these tune layouts you may want to omit one of those notes. Or sometimes you may be able to play your chord with the thirds out and omit two of the three notes from the tune layout.